 
    Gulf Coastal Software 

  MultiTimer

    MultiTimer is a countdown timer program.  It has a
  total of 10 countdown timers.  The interface can be setup
  to display a message on the individual timer start buttons.
  Upon a countdown time being reached, the button corresponding
  to the timer will begin to flash.  There is also an option to
  sound an alarm.  The alarms can be set to sound once or
  continuously.  Countdown times can be up to 59 hours, 59 minutes,
  and 59 seconds.  The alarm interface will popup into view upon
  an alarm if it has been minimized to the tray.  The tray icon is
  animated when any timer is running.

    Right click on the bottom of the timer interface to check an
  option to minimize the program to the tray upon click a timer
  start button.

  Large Timer Buttons:

    Right click on a start button to setup the countdown hours,
  minutes, and button display message.  Click on the hours and
  minutes display to set the countdown time.  The hours and minutes
  can then be rotated via the up and down arrow keys found on the
  keyboard.  Right click on a timer display (main interface) to
  setup seconds if needed.

  Small Timer Buttons:

    The small timer buttons are used to start a timer for the
  fixed time in minutes that are on the buttons.  No message is
  displayed along with these timer buttons.  Right click on a
  small button to see how much time is left before the alarm
  sounds.   
    The small button alarms are fixed as 1 through 10, 15, and
  20 minutes.  These can be altered, however, by opening the
  pprefs.mtm file and changing the number of seconds on the line
  pertaining to the small buttons.  Each line contains the number
  of whole minute seconds for each button.  These amounts should
  always be a multiple of 60.

  Alarms:

    The timer alarm can be changed by the user if desired.  Wav
  file Alarm1.wav is the file played if the 'Recur' (continuous)
  box is checked.  Wav file Alarm2.wav is the file played if the
  'Recur' box is not checked.

  Alarm Clock:

    An alarm clock can be accessed by right clicking on the timer
  interface.  There are two alarms on the clock.  Alarm1 is a straight
  alarm.  Set the time to wake up, click on the AM or PM letters,
  and click the alarm 'ON'.  There is a 'Recur' option to continuously
  sound the alarm until clicked 'OFF'.  If 'Recur' is not checked, the
  alarm sounds three times in a row and stops.

    Alarm2 sounds three times in a row at the selected time and
  then repeatedly sounds again every 'ALARM 2 - Snooze' minutes
  until Alarm2 is clicked 'OFF'.

  Processes:

    A daily external program startup routine has added to the program.
  Right click on the bottom of the program interface and click 'Processes'
  and enter path to programs as described.  A check will be made to
  see if a program is already running and if so, the program will be shut
  down and then restarted.



  New in version 2.12

  1. Tray icon changes color in tray according to time left.

  New in version 2.11

  1. There seemed to be a problem on Vista.  The alarm was turned Off
     when the Alt key was presses.  This key is automatically pressed
     in some other programs.

  New in version 2.10

  1. Alarm clock button was turned off upon clicking to sound check
      box.

  New in version 2.9

  1. Addressing problem in small button routine fixed.
  New in version 2.6, 2.7 & 2.8

  1. Minor button color fix.

  New in version 2.5

  1. The '-' button on the alarm clock interface now places the program
      to the tray.  An 'A' button was added to close the clock interface.
  2. A new checkbox was added to cause the alarm clock buttons to be
      in the ON position at program start.
  3. New buttons were added to allow the alarm times to be copied to
      each other.
  4. A single stop watch was added to the timer.

  New in version 2.4

  1. Skipped

  New in version 2.3

  1. An 'A' button was added to top to open alarm clock interface.
  2. A '-' button added to alarm clock window to close alarm clock.

  New in version 2.2

  1. Problem with 'Always on top' option fixed.

  New in version 2.1

  1. Timer no longer causes system beep upon hitting enter
      to stop an alarm.
  2. Always on top button added to top button area.

  New in version 2.0

  1. Processes added (see above).
  2. Transparent tray icons added.

  New in version 1.9

  1. The program now pops up when the new alarm clocks ring.

  New in version 1.8

  1. Stopping a timer alarm by hitting 'Enter' was not working.

  New in version 1.7

  1. An alarm clock was added.

  New in version 1.6

  1. An alarm can now be shut off by hitting the 'Enter' key.


------------------------------------------------------------

Gulf Coastal Software 

gcs@nym.panta-rhei.eu.org
http://www.simtel.net/search.php%5Baction%5Dsearch%5BauthorName%5DGulf+Coastal+Software%5BSiteID%5Dsimtel.net


